Changes to Step #83
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| [title] Prep Bed Thermsitor | |
| [* black] Insert the thermsitor into the aluminum thermistor bracket as far as it will go. | |
| [* black] Use one of the M3 x 10mm long screws to secure the thermistor in place. | |
| [* icon_caution] Do not over-tighten the screw as you can crush the thermistor. You only want to tighten it slightly more than snug. | |
| + | [* icon_caution] In the pics, there is no white plug on the thermistor, yours SHOULD have the plug still on it! |