Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #83

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

+[title] Prep Bed Thermsitor
[* black] Insert the thermsitor into the aluminum thermistor bracket as far as it will go.
[* black] Use one of the M3 x 10mm long screws to secure the thermistor in place.
[* icon_caution] Do not over-tighten the screw as you can crush the thermistor. You only want to tighten it slightly more than snug.