Changes to Step #83
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| [* black] Insert the thermsitor into the aluminum thermistor bracket as far as it will go. | |
| - | [* black] Use one of the |
| + | [* black] Use one of the M3 x 10mm long screws to secure the thermistor in place. |
| [* icon_caution] Do not over-tighten the screw as you can crush the thermistor. You only want to tighten it slightly more than snug. |