Changes to Step #83
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
- | [* black] Insert wisdom here. |
---|---|
+ | [* black] Insert the thermsitor into the aluminum thermistor bracket as far as it will go. |
+ | [* black] Use one of the M4 x 10mm long screws to secure the thermistor in place. |
+ | [* icon_caution] Do not over-tighten the screw as you can crush the thermistor. You only want to tighten it slightly more than snug. |