Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #82

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

[title] Prep Bed Thermistor
[* black] We will now be prepping the heated bed parts. You will use the cartridge thermistor, aluminum thermistor housing, white 2 position lever wire connector, 2x M3 x 10mm long flat head screws, and one washer for this step.
-[* black] Cut off the white 2 pin connector from the thermistor as close to the connector as possible as shown in Pic 2.
-[* black] Strip about a half inch of the thermistor ends exposing the wire as shown in Pic 3.

Image 2

Deleted

Image 3

Deleted