Changes to Step #80
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| - | [* black] Z Tower |
|---|---|
| + | [* black] This step we will use the last remaining aluminum extrusion tower. |
| + | [* black] Feed the black wire coming from the Solid State Relay up the extrusion as you have done before and out the top of the extrusion as shown in Pics 1 and 2. |
| + | [* black] Install the extrusion in the last remaining bracket that is closest to the relay and tighten the button head screws to secure the tower in place. |