Changes to Step #78
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
[title] Prep Thermistor wires | |
[* black] This step we will get the 2 26ga white wires from the wire pack . | |
- | [* |
+ | [* icon_caution] The ends of these wires are pre-crimped with different style crimps. Refer to the pictures and make sure the correct side are used. |
[* black] These connectors are inserted into a white 2 pin connector aligning the back of the connector with the windows in the connector | |
[* black] Insert them all the way until they click and lock in place in the connector as shown in Pic 2. |