Changes to Step #78
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
+ | [title] Prep Thermistor wires |
---|---|
[* black] This step we will get the 2 26ga white wires from the wire pack . | |
[* black] On one end of the wires are pre-crimped connectors. | |
[* black] These connectors are inserted into a white 2 pin connector aligning the back of the connector with the windows in the connector | |
[* black] Insert them all the way until they click and lock in place in the connector as shown in Pic 2. |