Changes to Step #75
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Tighten all 4 Button head cap screws to secure the tower to the brackets. |
| + | [* black] Make sure these bolts are tightened down and secure as they are what hold the towers in place and help prevent any flex in the towers. |
| + | [* black] Get one of the small shims from the frame pack and place it on the brackets as shown in Pic 3. |