Changes to Step #73
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
+ | [title] Feed Wire up Extrusion |
---|---|
[* black] This step will use one of the extrusion towers. | |
[* black] We will be installing the Y tower for the machine. | |
[* black] You will have 3 wires coming from the power supply out the same side hole in the front of the power supply. One red, one black, and one green. | |
[* black] Feed these wires through the center of the aluminum extrusion pointed out in Pic 1. | |
[* black] Feed the wires all the way through the extrusion till it is coming out the other side. |