Changes to Step #71
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Power Supply Wiring |
|---|---|
| [* black] In this step you will use one of the 1350mm long black wires with a ring terminal on one end. | |
| [* black] Feed the ring terminal into the power supply bracket through the hole in the front as shown in Pic 1. | |
| [* black] Attach the ring terminal next to the black wire on the power supply under the terminal labeled -V as shown in Pic 2. |