SeeMeCNC Guides
/
/

Site Navigation

Your Account

Choose Language

Changes to Step #70

Edit by D. Stark —

Edit approved by Tim Koscielny

Before
After
Unchanged

Step Lines

[title] Power Supply Wiring
-[* black] Take the blue ring terminal from the red wire harness that has 2 red wires in it.
-[* black] Secure it next to the other red wire ring terminal using the second from the last screw terminal under the label +V on the power suppply.
+[* black] Continuing to work with the red 2-wire harness from the previous step, route the 1350mm red wire out of the power supply enclosure using the same hole as the 1350mm green wire.
+[* black] Secure the blue ring terminal to the power supply using the second from the last screw terminal under the label +V on the power supply.