Changes to Step #69
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Power Supply Wiring |
|---|---|
| [* black] This step will use the red wire harness that has 2 red wires into the blue ring terminal with one 400mm long red wire with a red ring terminal, and the 1350mm long red wire with one bare end. | |
| [* black] Feed the 400mm long wire over the power supply and through the power supply bracket hole as shown in Pic 2. | |
| [* black] Secure the red ring terminal from the 400mm red wire to the solid state relay as shown in Pic 3. The red wire goes to the terminal labeled with a + above it. |