Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #69

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] This step will use the red wire harness that has 2 red wires into the blue ring terminal with one 400mm long red wire with a red ring terminal, and the 1350mm long red wire.
+[* black] This step will use the red wire harness that has 2 red wires into the blue ring terminal with one 400mm long red wire with a red ring terminal, and the 1350mm long red wire with one bare end.
+[* black] Feed the 400mm long wire over the power supply and through the power supply bracket hole as shown in Pic 2.
+[* black] Secure the red ring terminal from the 400mm red wire to the solid state relay as shown in Pic 3. The red wire goes to the terminal labeled with a + above it.