Changes to Step #68
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
- | [* black] Insert wisdom here. |
---|---|
+ | [* black] Repeat the same process as the previous step with the 400mm red wire that has one ring terminal and bare wire on the other end. |
+ | [* black] Feed the wire through the power supply bracket hole as in the previous step shown in Pic 1. |
+ | [* black] Secure the ring terminal to the power supply to the first location under the label for +V. You will have 2 empty screw terminals on the power supply between this red wire and the black wire installed in the previous step as shown in Pic 2. |
+ | [* black] The bare end of the wire will go on the second wago in the position next to the black wire installed in the previous step as shown in Pic 3. |