Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #64

Edit by Andy Oprisko

Edit approved by Andy Oprisko


Step Lines

-[* black] Insert wisdom here.
+[* black] This step will use the 4 wago 2 conductor clips.
+[* black] They will have double sided tape pre-installed on them. You will remove the red protective film from the tape to expose the adheasive as shown in Pic 2.
+[* black] Attach two of the connectors next to the relay and two of them behind the relay as shown in Pic 3. Just press them in place and the adhesive will secure them in place.