Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #56

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

+[title] Wiring Power Supply
[* black] Take the white wire with spade connector from the power supply and attach it to the leg of the power plug as shown in Pic 1.
[* icon_note] The locations of these power wires is important. Follow the pictures carefully!
[* black] Take the black wire from the rocker switch and attach the other end with the spade connector to the power plug as shown in Pic 2.
[* black] Take the green wire from the power supply with the spade connector on it and plug it into the power plug as shown in Pic 3.