Changes to Step #56
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Take the white wire with spade connector from the power supply and attach it to the leg of the power plug as shown in Pic 1. |
| + | [* icon_note] The locations of these power wires is important. Follow the pictures carefully! |
| + | [* black] Take the black wire from the rocker switch and attach the other end with the spade connector to the power plug as shown in Pic 2. |
| + | [* black] Take the green wire from the power supply with the spade connector on it and plug it into the power plug as shown in Pic 3. |