Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #55

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] This step you will use the power supply bracket an the black wire with a spade connector at each end of it.
+[* black] Press one of the spade connectors onto the rocker switch. Press the spade connector on the leg of the switch that is in the center of the switch as shown in Pic 2.
+[* black] From the power supply, insert the black wire with the spade connector on the remaining leg of the rocker switch.