Changes to Step #52
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Power Supply Prep |
|---|---|
| [* black] This section will be wiring up the power supply. | |
| [* black] We will start with the black wire harness that has 2 wires made earlier. | |
| [* black] Start with the outermost screw on the power supply. It is labeled with an L above the screw. | |
| [* black] Remove the screw and attach to the power supply on the blue ring terminal and tighten the screw to secure it in place. |