Changes to Step #52
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
- | [* black] Insert wisdom here. |
---|---|
+ | [* black] This section will be wiring up the power supply. |
+ | [* black] We will start with the black wire harness that has 2 wires made earlier. |
+ | [* black] Start with the outermost screw on the power supply. It is labeled with an L above the screw. |
+ | [* black] Remove the screw and attach to the power supply on the blue ring terminal and tighten the screw to secure it in place. |