Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #51

Edit by Andy Oprisko

Edit approved by Andy Oprisko


Step Lines

+[title] Install Power Switch
[* black] Remove the large nut from the rocker switch to separate them.
[* black] Install the rocker switch into the hole of the power supply bracket as shown in Pic 2 with the legs of the rocker switch closest to the vent holes.
[* black] Secure the rocker switch in place with the nut removed at the beginning of this step. You may need to use a larger set of pliers to tighten the nut securely.