Changes to Step #49
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
- | [* black] Insert wisdom here. |
---|---|
+ | [* black] Insert the plug reciever with fuse holder into the power supply bracket from the outside of the bracket as shown in Pic 1. |
+ | [* black] Using the M3 x 10mm long screws from the outside of the bracket, insert the screw through the plug reciever and power supply bracket. |
+ | [* black] Holding the M3 lock nuts with a pair or pliers, screw the plug reciever in place to the power supply bracket securing it in place. |