Changes to Step #44
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| [* black] Insert the nylon screws into the black plastic feet so the head of the screws goes inside the feet as shown in the first pic. Do this to all 6 screws and feet. | |
| [* black] Place the nylon nuts in the shim plates as shown in Pic 2. | |
| [* black] Insert the nylon screw and foot through the bottom of the plate and up through the shim plate, screwing into the nylon nut to secure the foot in place. | |
| + | [* black] Install all 6 feet this way. |