Skip to main content

Changes to Step #44

Edit by Andy Oprisko

Edit approved by Andy Oprisko


Step Lines

-[* black] Insert wisdom here.
+[* black] Insert the nylon screws into the black plastic feet so the head of the screws goes inside the feet as shown in the first pic. Do this to all 6 screws and feet.
+[* black] Place the nylon nuts in the shim plates as shown in Pic 2.
+[* black] Insert the nylon screw and foot through the bottom of the plate and up through the shim plate, screwing into the nylon nut to secure the foot in place.
+[* black] Install all 6 feet this way.