Changes to Step #43
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Place the shim and bracket on the sheet metal lining up the tabs from the bracket with the holes on the sheet metal. |
| + | [* black] Pic 2 is showing that the tabs will stick out through the sheet metal. This is normal. |
| + | [* black] Place all 3 brackets and shims on the sheet metal as shown in Pic 3. |
| + | [* icon_caution] Make sure the sheet metal is in the orientation shown in Pic 3 as you do not want to mount the brackets to the wrong side of the sheet metal. |
| + | [* black] All 3 brackets should have the PEEK insulator facing upwards at this point. |