Changes to Step #41

Edit by Andy Oprisko

Edit approved by Andy Oprisko


Step Lines

+[title] Base Assembly
[* black] This section will be working on the lower portion of the machine.
[* black] You will have 3 bracket assemblies built earlier. These are the ones without the motors.
[* black] You will also need the lower sheet metal plate, 3 shims (big), 6 plastic feet, 6 rubber feet, 6 nylon screws and nuts, and 6 of the 12 6-32 x 7/8"L Phillip Pan Head Screws as shown in the picture.