Changes to Step #41
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
[* black] This section will be working on the lower portion of the machine. | |
[* black] You will have 3 bracket assemblies built earlier. These are the ones without the motors. | |
- | [* black] You will also need the lower sheet metal plate, 3 |
+ | [* black] You will also need the lower sheet metal plate, 3 shims (big), 6 plastic feet, 6 rubber feet, 6 nylon screws and nuts, and 12 6-32 x 7/8"L Phillip Pan Head Screws as shown in the picture. |