Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #41

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] This section will be working on the lower portion of the machine.
+[* black] You will have 3 bracket assemblies built earlier. These are the ones without the motors.
+[* black] You will also need the lower sheet metal plate, 3 shims (big), 6 plastic feet, 6 rubber feet, 6 nylon screws and nuts, and 6 of the 12 6-32 x 7/8"L Phillip Pan Head Screws as shown in the picture.