Changes to Step #38
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| [* black] The remaining 2 wires will be a red and a black wire and 2 red ring terminals. | |
| - | [* |
| + | [* icon_note] Wire length: 1x red 400mm, 1x black 400mm |
| [* black] Strip the ends of the wires and crimp one ring terminal on each wire. | |
| [* black] You should have two wires with a ring terminal on each and a bare end on the other side of each wire. |