Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #36

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

[* black] This step will use one long length of red wire, and one shorter length of red wire. Also you will use one blue ring terminal and one small red ring terminal.
+[* icon_note] Wire length: 1x red 1350mm, 1x red 400mm
[* black] Strip the ends of the wires as previously done.
[* black] Combine the ends of the two wires as done previously. Crimp the blue ring terminal to the end of the combined wires.
[* black] Crimp the red ring terminal to the end of the shorter red wire as shown in Pic 3