Changes to Step #33
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Prepping the Wiring cont. |
|---|---|
| [* black] Combine the ends of the black wires together like the previous steps and crimp the blue connector on the combined wires. | |
| [* black] Crimp the spade terminal on the remaining end of the short wire. | |
| [* black] Crimp the smaller red ring terminal to the remaining end of the long black wire. | |
| [* black] You will now have the black wire harness complete as shown in Pic 2. |