Changes to Step #32
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| [* black] This step will use 2 black wires. One short and one long. Note that there are 2 other very long black wires, these will not be used yet. Also you will use one blue ring terminal, one small red ring terminal, and one spade connector. | |
| + | [* icon_note] Wire lengths: 1x black 400mm, 1x black 150mm |
| [* black] Strip all the wires as previously done with the other steps. |