Changes to Step #31
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
- | [* black] Insert wisdom here. |
---|---|
+ | [* black] On the end of the short white wire, you will attach the spade connector. |
+ | [* black] Crimp the spade connector on the end of the short wire as you did with the green wires. |
+ | [* black] You will now have a white wire harness as shown in pic 3 with both white wires going to the blue ring terminal, and the short white wire with a spade connector. |