Changes to Step #28
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Insert the spade connector on the end of the other short stripped green wire. |
| + | [* black] Crimp the spade connector to the wire making sure you have a sold crimp. |
| + | [* black] You should have a wire harness as shown in Pic 3. It will have a long green wire with one end free, a blue ring terminal with all 3 green wires attached to it, one short green wire with a spade connector, and one short green wire with a large red ring terminal on it. |