Changes to Step #19
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
+ | [title] Install the Endstops cont. |
---|---|
[* black] Pic 1 shows the installed endstop. You will see the button on the endstop is facing the edge of the bracket and must be oriented as shown in Pic 1. | |
[* black] Repeat the endstop installation on all 3 large brackets. | |
[* black] Find the 4 M3x10mm screws and washers. | |
[* black] Place the washers on all 4 screws. Repeat this for the other 2 piles of parts giving you 12 M3x10mm screws and washers. |