Changes to Step #19
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
- | [* black] Insert wisdom here. |
---|---|
+ | [* black] Pic 1 shows the installed endstop. You will see the button on the endstop is facing the edge of the bracket and must be oriented as shown in Pic 1. |
+ | [* black] Repeat the endstop installation on all 3 large brackets. |
+ | [* black] Find the 4 M3x10mm screws and washers. |
+ | [* black] Place the washers on all 4 screws. Repeat this for the other 2 piles of parts giving you 12 M3x10mm screws and washers. |