Changes to Step #18
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
- | [* black] Insert wisdom here. |
---|---|
+ | [* black] Insert 2 #4 threaded screws into the endstops. Enter the endstop from the side the legs are facing as shown in Pic 1. |
+ | [* black] Line the screws up to the holes on the large bracket as shown in Pic 2. |
+ | [* black] Tighten the endstop to the bracket. The screws will thread directly into the plastic bracket. Be careful not to strip the screw head and take your time tightening the screws to secure the endstop. |