Changes to Step #7
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
- | [* black] Insert wisdom here. |
---|---|
+ | [title] Install Idler Bearing |
+ | [* black] With the other bolt attach the bolt to the bracket with another T-Nut. This is also not tightened yet, and left loose. |
+ | [* black] Take one of the idler pulleys and plate it on the peg that is in align with the bolts and t-nuts as shown in Pic 2. |
+ | [* black] This idler just presses on the peg at this time. |