Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by AlbertoEinstein

Edit approved by geneb


Step Lines

[title] Insert lock nuts in motor plates.
[* black] For this step you will still be using the parts from the previous step.
[* black] You will want to insert the lock nuts into the slots as shown in Pic 1. There is a hex side and a rounded side with a nylon insert on the lock nuts.
+[* icon_note] You shouldn't generally have to force the nuts in, it should be easy on your fingers.
+[* icon_note] If you are having trouble, rotate it side to side (like a steering wheel) and it should drop right in with minimal pressure.
[* black] The hex side should face the outside of the brackets and the round side with nylon inserts should face the center of the brackets.
[* black] Installed lock nuts are shown in Pic 2.
[* black] You will insert the lock nuts on all 12 brackets.