Changes to Step #5
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
- | [* black] Insert wisdom here. |
---|---|
+ | [title] Insert lock nuts in motor plates. |
+ | [* black] For this step you will still be using the parts from the previous step. |
+ | [* black] You will want to insert the lock nuts into the slots as shown in Pic 1. There is a hex side and a rounded side with a nylon insert on the lock nuts. |
+ | [* black] The hex side should face the outside of the brackets and the round side with nylon inserts should face the center of the brackets. |
+ | [* black] Installed lock nuts are shown in Pic 2. |