Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #11

Edit by Andy Oprisko

Edit approved by Andy Oprisko


Step Lines

[title] Install Pulleys
[* black] This section will be assembling the motor carriage assembly. For this section you will use the parts shown
[* black] You will start with 3 motors and 3 pulleys.
[* black] You will insert a pulley onto the motor as shown in Pic 2. There is a flat section on the motor shaft, and you will line the set screw up with this flat so it is tightened onto the flat.
[* black] You will insert the pulley as shown in pic 3 to the depth it is shown. The top arrow shows the flat of the motor almost alinged with the base of the pulley. This is where you want to tighten the set screws.
-[* icon_note] Be sure to tighten both set screws on the pulley
-[* black] Install pulleys on the remaining 2 motors the same way you completed the first.