Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by Caleb Fairres

Edit approved by Caleb Fairres

Before
After
Unchanged

Step Lines

+[title] Hotend Connections Part 1
+[* black] Pull back the cable boots to give access to the connectors at the end of the whip.
+[* black] Plug in the 10 pin SL connector to its home on the hotend.
+[* black] Rout the power and thermistor section of the whip to the back left of the hotend and zip tie around the mesh loom and the hotend board arm as shown.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added