Changes to Step #11
Edit by Caleb Fairres —
Edit approved by Caleb Fairres
- Before
- After
- Unchanged
Step Lines
| + | [title] Post Wire Routing |
|---|---|
| + | [* black] If you want, use an extra zip tie through the unused hole in the machine's frame to keep the wires clean and out of the way. |
| + | [* black] Reinstall the extruder assembly over the hole as it was before. |
| + | [* black] Reinstall the linear rail bolts. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added