SeeMeCNC Guides
/
/

Site Navigation

Your Account

Choose Language

Changes to Droplit v2 Mirror Mount Sub Assembly Introduction

Edit by SeeMeCNC —

Edit approved by SeeMeCNC

Before
After
Unchanged
Introduction
This Assembly Guide will walk you through building the Mirror Mount Sub-Assembly which is used on the DropLit V2.
Difficulty
Moderate
Very easy
Conclusion
After you have complete the assembly of the Tilt Mirror Mount Sub-Assembly, set this aside. It will be installed in the Droplit V2 at the completion of the build.
Summary
Mirror Mount Sub Assembly. The Mirror Mount Sub-Assembly uses 3 basic pieces of hardware, 6-32 x 1" Flat Head Screws, 6-32 Nylon Lock Nuts, and Acetyl Spacers. For this reason, the hardware will not be called out in the text of the assembly steps.

Tools

  • #2 Phillips Screwdriver x1 added.
  • 5/16 Wrench x1 added.

Parts

  • #6-32 Nylon Lock Nut x1 added.
  • #6-32 x 1.75" Phillips Pan Head Screw x1 added.