SeeMeCNC Guides
/
/

Site Navigation

Your Account

Choose Language

Changes to Installing a Raspberry Pi 2 inside a Rostock Max v2 Introduction

Edit by SeeMeCNC —

Edit approved by SeeMeCNC

Before
After
Unchanged
Title
Installing a Raspberry Pi 2 ininside a Rostock Max v2
Imageid
Before
After
Difficulty
Moderate
Easy
Summary
This How-To guide will walk you through the steps of installing a Raspberry Pi in your Rostock Max v2, providing you with the ability to wirelessly control your printer from anywhere with an internet connection.

Tools

  • Drill x1 added.
  • #42 Drill Bit x1 added.
  • #2 Phillips Screwdriver x1 added.

Parts

  • Raspberry Pi 2 x1 added.
  • 5 Volt USB power adapter (US Plug only) x1 added.
  • WiPi USB wireless adapter x1 added.
  • Micro USB cable x1 added.
  • 4GB (or larger) MicroSD Card x1 added.
  • USB cable to connect your 3D printer to the Pi x1 added.

Steps

Step #: 1
Before
stepid 126 stepid 126
After
stepid 126 stepid 126
Step #: 2
Before
stepid 127 stepid 127
After
stepid 127 stepid 127
Step #: 3
Before
stepid 128 stepid 128
After
stepid 128 stepid 128
Step #: 4
Before
After
stepid 129 stepid 129
Step #: 5
Before
After
stepid 130 stepid 130