|Time Required Min||
|Time Required Max||
- Phillips Screwdriver, size P1 x1 added.
- 290mm Ball Joint Arm x6 added.
- Ball Arms x6 3 of the 6 should already be installed on the Injection Molded Carriages! added.
- Hot End Platform Spacer x3 These are machined Aluminum added.
- Tension Spring for IM Ball Joint Arms x6 Injection molded with a tiny ball on each end and a squiggly "spring" in the middle. added.
- #6-32 x 1.75" Phillips Pan Head Screw x3 added.
- #6-32 Nylon Lock Nut x3 added.
- #4, 3/8" Sheet Metal Screw x6 These should have been used to install the Ball Joint Arms. added.
- #4 Flat Washer x6 These should have been used to install the Ball Joint Arms. added.
- Ball Joint Platform x1 added.
- Hot End Adapter for the Ball Joint Platform x1 This part is laser cut Melamine. added.
- In Progress added.
- User-Contributed Guide added.