Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Installing the Ball-Joint Delta Arms (new 10/15) Introduction

Edit by geneb

Edit approved by geneb

Before
After
Unchanged
Category
Rostock MAX Upgrade Kits
Type
how-to
Title
Installing the Ball-Joint Delta Arms
Time Required Min
No estimate
Time Required Max
No estimate
Difficulty
Easy
Author
Public
No
Summary
This guide will show you how to install the new Ball Joint Delta Arms on your Rostock MAX v1 or v2 3D printer. Note that you must have the new injection molded carriages installed BEFORE you can install this upgrade!

Tools

  • Phillips Screwdriver, size P1 x1 added.

Parts

  • 290mm Ball Joint Arm x6 added.
  • Ball Arms x6 3 of the 6 should already be installed on the Injection Molded Carriages! added.
  • Hot End Platform Spacer x3 These are machined Aluminum added.
  • Tension Spring for IM Ball Joint Arms x6 Injection molded with a tiny ball on each end and a squiggly "spring" in the middle. added.
  • #6-32 x 1.75" Phillips Pan Head Screw x3 added.
  • #6-32 Nylon Lock Nut x3 added.
  • #4, 3/8" Sheet Metal Screw x6 These should have been used to install the Ball Joint Arms. added.
  • #4 Flat Washer x6 These should have been used to install the Ball Joint Arms. added.
  • Ball Joint Platform x1 added.
  • Hot End Adapter for the Ball Joint Platform x1 This part is laser cut Melamine. added.

Flags

  • In Progress added.
  • User-Contributed Guide added.

Steps

Step #: 1
Before
After