Difficulty
Moderate
Steps
1
Time Required
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
Private
This guide will not appear in search results and can only be viewed by team members!
Quiz
0
Introduction
Congrats on your new Factory Assembled Rostock Max v3 This guide will help you in getting started with your new machine.
Your machine was fully assembled, calibrated and printed successfully before it left our factory.
Please make sure there are no damages to your new Rostock Max v2. Inspect it carefully for any broken parts. If you find any damages please STOP and contact the company that you purchased it from immediately. Please include your order number when contacting them as it helps to speed up the process.
Your machine was fully assembled, calibrated and printed successfully before it left our factory. We have done some things to make sure the machine does not get damaged while shipping the printer. Please complete the following steps:
-
-
We have done some things to make sure the machine does not get damaged while shipping the printer. Please complete the following steps:
-
Carefully remove all shrink wrap from the printer. Be careful not to cut the machine (or yourself) if you are using a knife.
-
The arms have been inverted to prevent the hot end nozzle from striking the glass print surface during shipping.
-
