You're viewing the latest revision of this guide.

Older
Apr 26, 2019 - 08:04:48
Apr 26, 2019 - 08:04:48 Oct 12, 2018 - 03:10:57 Oct 12, 2018 - 03:10:18 May 04, 2018 - 11:05:50 May 04, 2018 - 11:05:42 May 04, 2018 - 11:05:09 May 04, 2018 - 10:05:58 May 04, 2018 - 10:05:40 May 04, 2018 - 10:05:36 May 04, 2018 - 10:05:29 May 04, 2018 - 10:05:47 May 04, 2018 - 10:05:49 May 04, 2018 - 10:05:14 May 04, 2018 - 10:05:52 May 04, 2018 - 10:05:42 May 04, 2018 - 10:05:34 May 04, 2018 - 10:05:29
Newer

DUET reset bed map for 'first probe' macro

Written By: SeeMeCNC (and one other contributor)
  • Comments: 1
  • Favorites: 0
  • Completions: 5

Difficulty

Easy

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

0

  1. Open the system editor

    • Open the system editor

    • delete the file named "config-override.g" in the picture attached.

    • also delete the file that says "heightmap.csv"

    • press "Emergency Stop" button to reset the Duet control board.

  2. clear the nozzle and clear the bed

    • clear the nozzle and clear the bed

    • Be sure the bed and nozzle at room temperature, not hot

    • Choose "Machine Control"

    • click the "First Probe" macro

    • Wait for probing to finish. Once complete, shut the machine completely off using the power switch, wait 30 seconds, power it back on and reconnect.

    • You are now ready to start printing!

Author

with 1 other contributor

SeeMeCNC

Member since: 10/04/2016

562,208 Reputation

16 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 15

All Time: 2,683